Automatic Abrasive Cutting Machine, Programmable with 5,7" HMI touch screen control, with Siemens PLC control unit, with automatic chop cutting and automatic table-feed cutting systems, with various cutting methods, programmable with coloured LCD display of cutting parameters, accurate and motorized positioning of the specimen in X - Y and Z axis (X-axis for plane parallel cutting is optional), integrated feed path control, power dependent adjustable feed rate, variable cutting force, pulse cutting mode, bar graph overload display, compact cutting motor, 2850 rpm cutting speed, with electronic brake system, cutting capacity upto 85/110 mm solid stock, with cut-off wheels upto ø250/300mm, twin T-slotted table(Y-direction only) made of stainless steel, bottom part as rugged alloy base casting, 80 lt. recirculating cooling unit.
Includes a standard set of cutting consumables composed of; An assortement of 20 cut-off wheels and 5 lt of Metcool cooling fluid.
| Model | SERVOCUT 301-AA | SERVOCUT 301-AA-V |
|---|
| Chop Cutting, Z Axis |
Automatic |
Automatic |
| Table Feed Cutting, Y Axis |
Automatic |
Automatic |
| Parallel Cutting, X Axis |
- |
- |
| HMI Touch Screen, (inch) |
5,7" |
5,7" |
| Step;Segment;Diagonal Cut |
Optional |
Optional |
| Pulse Cutting |
Yes |
Yes |
| Wheel Diameter, (mm) |
Ø300 - Ø250 |
Ø300 - Ø250 |
| Cutting Capacity Ø250, (mm) |
Ø85 |
Ø85 |
| Cutting Capacity Ø300, (mm) |
Ø110 |
Ø110 |
| Cutting Capacity Ø300, # (mm) |
70 x 200 |
70 x 200 |
| Y Axis Travel, (mm) |
225 |
225 |
| X Axis Travel, (mm) |
- |
- |
| Z Axis Travel, (mm) |
125 |
125 |
| T-Slot table dimension, mm (WxD) |
380 x 250 |
380 x 250 |
| T-Slot dimension, (mm) |
12 |
12 |
| Cutting Power kW (S1) |
4 |
4 |
| Cutting Power kW (S3) |
5,1 |
5,1 |
| Wheel Speed, rpm |
2850 |
- |
| Variable Wheel Speed, rpm |
- |
600 - 4000 |
| Table Feedrate, (mm/s) |
100 - 5000 |
100 - 5000 |
| Size, WxDxH, (cm) |
93 x 87,5 x 63 |
93 x 87,5 x 63 |
| Size, WxDxH, (cm) (with cabinet) |
93 x 87,5 x 139 |
93 x 87,5 x 139 |
| Weight, (kgs) |
222 |
222 |
| Cooling Unit, (lt) |
80 |
80 |
| Model | SERVOCUT 301-AA-AX | SERVOCUT 301-AA-V-AX |
|---|
| Chop Cutting, Z Axis |
Automatic |
Automatic |
| Table Feed Cutting, Y Axis |
Automatic |
Automatic |
| Parallel Cutting, X Axis |
Automatic |
Automatic |
| HMI Touch Screen, (inch) |
5,7" |
5,7" |
| Step;Segment;Diagonal Cut |
Optional |
Optional |
| Pulse Cutting |
Yes |
Yes |
| Wheel Diameter, (mm) |
Ø300 - Ø250 |
Ø300 - Ø250 |
| Cutting Capacity Ø250, (mm) |
Ø85 |
Ø85 |
| Cutting Capacity Ø300, (mm) |
Ø110 |
Ø110 |
| Cutting Capacity Ø300, # (mm) |
70 x 200 |
70 x 200 |
| Y Axis Travel, (mm) |
225 |
225 |
| X Axis Travel, (mm) |
70 |
70 |
| Z Axis Travel, (mm) |
125 |
125 |
| T-Slot table dimension, mm (WxD) |
(330+70) x 250 |
(330+70) x 250 |
| T-Slot dimension, (mm) |
12 |
12 |
| Cutting Power kW (S1) |
4 |
4 |
| Cutting Power kW (S3) |
5,1 |
5,1 |
| Wheel Speed, rpm |
2850 |
- |
| Variable Wheel Speed, rpm |
- |
600 - 4000 |
| Table Feedrate, (µm/s) |
100-5000 |
100 - 5000 |
| Size, WxDxH, (cm) |
93 x 87,5 x 63 |
93 x 87,5 x 63 |
| Size, WxDxH, (cm) (with cabinet) |
93 x 87,5 x 139 |
93 x 87,5 x 139 |
| Weight, (kgs) |
222 |
222 |
| Cooling Unit, (lt) |
80 |
80 |
| Clamping Devices for SERVOCUT 301 |
|---|
| GR 0170 |
Quick Acting Clamping Vise Assembly, Left, (Stainless Steel) |
| GR 0172 |
Quick Acting Clamping Vise Assembly, Right, (Stainless Steel) |
| GR 0151 |
Compact Vise Assembly, Spring Loaded, (Stainless Steel) |
| 15 01 |
MBU 1011 Vertical Clamping Device with clamping shoe,upto 90mm. |
| 15 03 |
MK 10 21 Height Block, 60 mm |
| GR 0453 |
Fastener vise for longitudinal sectioning of screws, fasteners, tubes, etc. from 12 to 45 mm. in length |
| GR 0310 |
Fastener Vise for longitudinal sectioning of screws, ball joint etc. From 60 to 100 mm. |
| Accesories for SERVOCUT 301 |
|---|
| GR 0760 |
Cabinet for floor model - SRC.301 |
| GR 0125 |
Laser alignment unit (for MA and AA models) |
| GR 0129 |
Manual / Auto Table drive system with electromagnetic clutch (y-axis) |
| GR 0991 |
Flange Set with larger diameter, Ø100 mm |
| GR 0930-00 |
Low Feedrate Kit(y-axis), Feedrate range: 50 - 4.000 microns/sec
(To be ordered simultaneously together with the machine order) |
| GR 0940-00 |
Low Feedrate Kit(z-axis), Feedrate range: 50 - 4.000 microns/sec
(To be ordered simultaneously together with the machine order) |
| GR 0925 |
Software packagefor optional cutting methods |
| 250 mm TRENO Series Abrasive Cut-off Wheels (Pack of 10) | |
|---|
| TRENO-NF |
19-020 |
Ø 250 mm, for Non-Ferrous Steels |
|
| TRENO-H |
19-021 |
Ø 250 mm, for Soft Steels < 23 HRC |
|
| TRENO-M |
19-022 |
Ø 250 mm, for Medium Hard Steels > 23-55 HRC < |
|
| TRENO-S |
19-023 |
Ø 250 mm, for Hard Steels > 50-60 HRC < |
|
| TRENO-SS |
19-024 |
Ø 250 mm, for Very Hard Steels > 60 HRC |
|
| 300 mm TRENO Series Abrasive Cut-off Wheels (Pack of 10) | |
|---|
| TRENO-NF |
19-040 |
Ø 300 mm, for Non-Ferrous Steels |
|
| TRENO-H |
19-041 |
Ø 300 mm, for Soft Steels < 23 HRC |
|
| TRENO-M |
19-042 |
Ø 300 mm, for Medium Hard Steels > 23-55 HRC < |
|
| TRENO-S |
19-043 |
Ø 300 mm, for Hard Steels > 50-60 HRC < |
|
| TRENO-SS |
19-044 |
Ø 300 mm, for Very Hard Steels > 60 HRC |
|
| 250 mm CUTO Series Abrasive Cut-off Wheels (Pack of 10) | |
|---|
| CUTO-M |
19-022/A |
Ø 250 mm, for Soft&Medium Hard Steels Upto 50HRC |
|
| CUTO-S |
19-023/A |
Ø 250 mm, for Hard Steels > 50-60 HRC < |
|
| Diamond Cutting Discs (1pc) | |
|---|
| DIMOS |
19-250 |
Ø 250 Diamond Cut-off wheels (Metal Bonded) |
|
| DIMOS |
19-251 |
Ø 250 Diamond Cut-off wheels (Resin Bonded) |
|
| DIMOS |
19-300 |
Ø 300 Diamond Cut-off wheels (Metal Bonded) |
|
| DIMOS |
19-301 |
Ø 300 Diamond Cut-off wheels (Resin Bonded) |
|
| Cutting Fluid | |
|---|
| METCOOL |
19-902 |
Nature Friendly Soluble Oil, 5 lt. |
|
Stay informed and sign up to receive via e-mail our free newsletter with news and promotions (at the moment only in Polish language).